Thank you for the feedback, J l.
~Heather
[email protected]
Downloadable Item(s)
Shipped Item
Will likely ship by Tuesday
Thank you for the feedback, J l.
~Heather
[email protected]
Does this clip allow you to embroider only on the bill or can you get to the cap? I have your frames already.
Thanks for the question, Sandra. Yes, it will allow you to embroider the cap itself. See this demo video:
https://www.youtube.com/watch?v=9VUCxEvknPA
~Heather
[email protected]
tried my cap hoop today and ended up not using it. Does the cap hoop snap directly to the bottom frame or on the top? If so it doesnt snap tight
Hi, Cynthia.
I'm sorry to hear of your troulbe. The cap hoop should snap onto the bottom frame.
Are your magnets loose or missing?
On the back of the clip, there should be 2 rectangular cut outs that house the silver magnets.
If you hold the clip and hold the metal clip part at the tops-- then give the clip a little shake and can hear the magnets moving around or if they are not perfectly fitting into the rectangular spots, you may have a defective clip. Please let us know if that is the case.
Thanks,
~Heather
[email protected].
I have a Baby Lock Adventura. What else will I need to go with your Magnetic Clip Hook
Hi, Donna. The Magnetic Hoop Clip is specifically designed for use with the Snap Hoop Monster. It might work with other hoops, but is more specifically recommended for the Snap Hoop monster.
~Heather
[email protected]
Has anyone tried it with the Magnetic Hoop for Bernina 880
Maria, the Magnetic Hoop Clip is made specifically to work with any Monster Snap Hoop. If you have a Snap Hoop Monster for your Bernina 880, this product is absolutely recommended.
~Heather
[email protected]
Great to hear, Thanks for the feedback, Paula.
~Heather
[email protected]
Just checking in to see if anyone tried this already and what they think of it.
Kathleen, I think this is a new product. If you try it out, let us know so your feedback will be available for others to read.
~Heather
[email protected]
j l.
I have used it for a few years. It is not new. It is easier on some caps than others as to being able to lie the bill and cap material flat. The downside is the placement on the cap is very limited. But it works fine. I have done about 6 caps. Look for a cap that can easily open up flat when the bill is clipped.