This floor stand is very sturdy and stable easily accommodates two-handed stitching. It is designed for larger projects and uses our E-Z Stitch Scroll Rods that are 24”, 26" 28", 30”, 36”, 42” and 48".
It is adjustable to many positions and sizes. The side supports have 18" of adjustable arm locations. The top and bottom cross braces expand in width from 24" to 48". The scroll frame can rotate a full 360° for quick, easy access to the back of your project. The stitcher can choose what height and depth the scroll frame is positioned toward them. The upper portion of the floor stand, which angles and lifts the frame, has 12" inches of adjustable positions. It also includes grooves to store floss bobbins along with holes designed for storing scissors, tweE-Zers, or a highlighter. Along with 4 different foot placement options.
As with all of our E-Z Stitch Products they are all interchangeable and uses the E-Z Stitch Scroll Rods and Side Bars. The feet are assembled with a Phillips Head screwdriver while the rest is assembled using the E-Z Stitch Knobs.
Included in the E-Z Stitch Floor Stand are a pair of 10" Side Bars, a pair of 30" Heavy Duty Scroll Rods with E-Z Stitch Tape for Rods, a roll (3 yards) of E-Z Stitch Tape for Fabric and 32 knobs (used in assembly and the hardware, which is provided). Along with all of the components of the E-Z Stitch Floor Stand (Legs, Feet, Arms, Elbows and Cross Braces) The E-Z Stitch Floor Stand is Manufactured by Embroidery Central.
When we were designing the E-Z Stitch Floor Stand, I had some simple requests.
First, stability... I stitch two handed and I wanted a needlepoint floor stand that I could put the weight of my arm on while stitching and it would not lose tension. Well, that is achieved with the support of the Elbow that is attached to the Arm. That Scroll Frame is not going to move at all and can hold more pressure than just my arm.
Second, Large Projects … I wanted it to hold those crazy fabulous, fun (some might say insane) large projects. This E-Z Stitch Floor Stand does just that-- it is adjustable and uses Scroll Rods that are 24”, 30”, 36”, 42” and 48”. Now all your large, again maybe insane, projects now have the perfect stand to go on.
Third was lightweight and easy to assemble... With how large this stand is, you would think it would be heavy but it is so light and moves easily on hardwood or carpet. Putting together the E-Z Stitch Floor Stand could not be easier. All you need is a Phillips Head screw driver. Everything else is assembled using screws and knobs which are included.
Fourth, adjustable... I wanted the Scroll Frame position to be adjustable. Just like our E-Z Stitch Lap Stand, the Scroll Frame can rotate a full 360° for quick, easy access to the back of your project. I also wanted to be able to choose at what height and depth the Scroll Frame came toward me. As you can see on the Legs, Arms and Elbows, there are so many adjustable positions. You can determine the location that each are placed at that you find comfortable.
I recently had neck problems and the doctor told me not to look down. Mmmm, I'm a stitcher how do I stitch without looking down? The E-Z Stitch Floor Stand to the rescue! With all of these adjustable options, I can place the Scroll Frame at such a position that it is right in front of me and I'm looking straight ahead, no more looking down. With a pillow under my arms for support, I am now completely comfortable stitching and looking forward.
Not only are the Arms and Elbows adjustable but Foot placement is also adjustable. No matter where you like to sit while stitching, whether it's a couch, chair or recliner, there is a foot placement for you. When looking at the Foot, you see there are 3 placement options.
Postion 1 (located about 5 inches from the end of the foot). Attach the Foot to Leg in Hole 1 and the block end of the Ankle in Hole 2. You would use this position if you stitch in a recliner or a couch where there is not a lot of space underneath.
Position 2 (located in the middle of the Foot). This would be a standard placement. Attach the Leg to this Second Hole. The Ankle then could attach to either Hole 1 or Hole 3.
Position 3 (last hole on Foot). Attach Foot to Leg in Hole 3 with the block end of the Ankle attached in Hole 2. This is the position you would put the foot if you have lots of space under the couch.
Note: Both Feet do not have to be in the same position, they could be in two different positions and your frame would still be stable.
Fifth is storability... Some stitchers don't have a lot of space and need to put their stitching away when company comes over. With the E-Z Stitch Floor Stand, all you have to do is detach the Elbows from the Arms and the Scroll Frame lays down against the legs. Then remove the Feet and Ankles and the E-Z Stitch Floor Stand could slide under a bed or lean up against a wall. Then with a couple twists of screws you are back to full stitch mode once again.
Sixth, additional features... After months of observing me stitching, the designer added some amazing additional features I didn’t even know I wanted. On the Arms, you will notice that there is a grove running down the length of each Arm. This is where you could store several floss bobbins of the current colors you are working with. In addition, at the block end of the Arm are two holes, the perfect place where you could store scissors, tweE-Zers, needles or a highlighter.
Access to the back of the Scroll Frame
The Scroll Frame is secured to the arms of the Floor Stand with two knobs. To rotate the Scroll Frame simply loosen both of those knobs before you flip it over to get to the back of your work. Then once you flip it back secure each to tighten it back down and secure the frame into place. If the knobs are not loosened before flipping the scroll frame over you could risk strip the insert in the knobs or even stripping the screw. I have found that with this double knob system I can get a tighter tension and secure my whole Scroll Frame tighter into the postions I want it in.
Finally, Beauty... As with all of the other E-Z Stitch Products, I wanted a beautiful piece of furniture. Our E-Z Stitch Floor Stand is fashioned from solid American Red Oak and hand finished with Golden Oak oil stain just like our E-Z Stitch Lap Stand.
So now you have a stable, large project, easy to assemble, adjustable, storable and beautiful Floor Stand that fits all of your stitching needs!
Now the only question is: what project are you going to put on first???
** NEW Feature as of 2020... the Cross Bars now have holes every 2 inches so it works with E-Z Stitch Scroll Rods in 24”, 26”, 28”, 30”, 36”, 42”, and 48”.
We have also added a new placement on the Legs for the Cross Bars. They can be placed either at the top or they can now be placed lower. This offers the same stability but not the Cross Bars are now no longer in the way of the TV.
The E-Z Stitch Floor Stand Includes:
2 Legs (features 18” of adjustable Arm locations)
2 Top and Bottom Cross Bars (expands to 24”, 26", 28", 30”, 36”, 42” and 48”)
2 Feet & Ankles (features 4 different foot placement options)
2 Arms & Elbows (features 12” of adjustable positions)
2 Side Bars 10"
2 Heavy Duty Scroll Rods 30” with E-Z Stitch Tape
1 roll of E-Z Stitch Tape for Fabric
8 Screws H 2.5”
2 Screws I 3”
2 Screws J 3.5”
4 Philips Head Screws K 1.5”
2 Philips Head Screws L 2”
The E-Z Stitch Floor Stand does work with recliners. My recliner is one of those recliner and a half and my project is on 42” Scroll Rods. Which is wide enough to fit over my recliner with the feet up.
The Hook and Loop Version uses our patened hook and loop tape system to easily attach and detach your projects from the stand. The webbing version requires you to hand stitch or sew your fabric to the rod webbing. Hook tape for fabric is not reusable, and must be purchased for every project.
We love to listen to our customers, and we have now made it possible to purchase the floor stand with webbing rods. Unfortunately, we can't swap out the length of the rod, but you can buy the webbing version of the floor stand from this page. Let us know if you have any questions!
In my video How to attach the tape for fabric to the fabric I go over how to to get nice tight tension. It is about half way into the video. I also have lots of other video ins my EZ Stitch Scroll Frame Blog that have a much of tips on all things EZ Stitch. Let me know if you have any other questions. https://www.embroidery.com/help.ec?docid=3576&efid...
Hi, Cristina. Yes, we can sell you a legs in red oak if you contact us directly: 800-428-7606 or [email protected] Before we do that, though, could you please clarify why you are needing new legs rather than repositioning your existing setup?
Hello Heather, Thank you for your reply. On the my current stand, I only have the two places for my cross bars... all the way on the top and one on the bottom. I do not have any other holes to install my cross bars at a different height. I have to sit on a booster seat when I stitch on my couch watching TV. I hope this makes sense.
Yes I have a light attached to my EZ Floor Stand In the picture with the recliner I have a light attached to the Cross Bars. It clamps right to them, you have to clap the light right where the bars over lap, so where there is two of them it gives you more of a surface to secure them to. Depending on how heavy your light is may determine the placement of your feet. You may need to move them forward to counter balance it. I have never had any issues with mine and I have my feet in 2 different positions. I hoped this answered your questions. Let me know if you have any others.
Hi Allison I am so glad you are loving the Floor Stand. We made some updates to it last fall and additional placement for the top cross bars was one of them. So look lower on the leg a little bit lower then the middle and you should see two holes where the cross bars could fit. Let me know if you do or do not find them. Happy Stitching.
Hi, Corrinna. We don't have a printed catalog, just our websites, www.embroidery.com and http://www.adp-usa.com/. The price on the floor stand is currently $349.95 (regularly $399.99). If you have further quesitons, please let us know.
Hi, Carol. Thanks for writing. All prices at Embroidery.com are listed in US dollars. Yes, you could move your work to your floor stand's 24" rods; either as a scroll frame set or on the floor stand itself. The rods interchangable.
Hi, Gabby. Your comments were erased as I received your email first and replied to you via email. The comments here appeared to be the same question and were erased since we did respond to your question already.