Hi Kathy, I checked on it with Dime and the LM6 hoop is compatible with SE1800.
https://embroidery.com/product?productID=267278

Thanks so much Kirsten!

Hi Kathy,

there are four hoops that are compatible with the 830L:

JM1 5"x7", JM2 8"2x8", JM7 8"x11", JM8 8"x14"

Hi Teresa,

Yes, there are some compatible hoops to the Brother Innovis NQ1700E. Which are the Hoops listed below, with a link to them on the website.

LM3: https://embroidery.com/product?productID=267275&ef...

LM1: https://embroidery.com/product?productID=267276&ef...

LM8: https://embroidery.com/product.ec?productID=275724

Please let us know if you have any other questions. Have a great day!

Hi Pauline,

Yes, there's a few Snap Hoops compatible to the Babylock Esante. The LM3 4" x 4", LM1 5" x 7" and LM8 6" x 10" are compatible to all of the Babylock Esante, except for the Esante ESe2. If you have a ESe2 then the only compatible hoop is the LM6 5" x 7". Please let us know if you have any other questions. Have a good day!

Hi Kristi,

Our compatibility chart from DIME doesn't have the Brother Pacesetter on it. Which means there isn't a compatible Snap Hoop. I'd recommend that you contact DIME, the manufacturer, to see if they have any plans to make a Snap Hoop for your machine. You can reach them at 888-739-0555 or [email protected] Have a good day!

Hi Michael,

The stitchable area of the hoop is 210mm x 400 mm. The hoops are named by the stitchable area; their actual physical size is larger because of the size of the hoop and its margins.

My Snap hoop for the Brother PE-700 has margins similar to that of my regular hoop.

As Jeanne, said, if you do need to know the size of the margin on each side you may have the best success by contacting Dime at the number she provided

Hi Michael,

All the information we have is what DIME has given us. DIME is the manufacturer of the Snap Hoops. I'd recommend that you contact DIME since they'd know more on the inches next to the hoop. They can be reached at 888-739-0555 or [email protected]

Hi Megan,

Yes, the Luminaire 2 XP2 is compatible with a few Snap Hoops. The hoops it is compatible with are these:

Snap Hoop LM3: https://www.embroidery.com/product?productID=26727...

Snap Hoop LM1: https://www.embroidery.com/product?productID=26727...

Snap Hoop LM5: https://www.embroidery.com/product?productID=26727...

Snap Hoop LM8: https://www.embroidery.com/Dime-SnapHoopMonster-LM...

Please let us know if you have any other questions. Have a great day!

Hi Ann, I know the grid you are talking about. Here it is:

https://www.embroidery.com/how-to-add-rulers

I'm not sure what kind of registering you would need to do for the hoops, but I know that when you buy software through us at Embroidery.com, it registers with Dime as well; so they also have record of your purchase and can support you in any of your needs, too.

Hi Ann,

If you purchased this DIME hoop from Amazon then I'd recommend contacting DIME about the grid to download. They should have that since the hoops are their products, and we just sell the hoops from them. They can be reached at 888-739-0555 or [email protected] It is fine if you have an account with us as well, since we sell DIME products too. Have a good day!

Hi Debra,

What Jeanne said about the hoops is for sure true. With a traditional hoop, you can just pick the hooped item up and even press your fingers against the back of the hooped area and not lose the hooping. The Monster hoop is much easier to un-hoop, so you wouldn't want to do that; instead it comes with a shield that you would use when picking up and carrying the hoop to your machine. THEN when you're quilting edge to edge and you need to move the hoop, it is SO easy to do, and that's what makes it marvelous for this application. You don't need to pick up your whole quilt and go back to your hooping area, you can just do it right at the machine.
Here's a video on how that works, since I think it really helps to see it in action.

Hi Debra,

DIME is the manufacturer of the Snap Hoops, and they do recommend them for quilting. It's true that they don't hold in the traditional way, but that's what makes them really great for end to end quilting. Please let us know if you have any other questions. Have a great day!

Hi Claire,

Thanks for reaching out to embroidery.com! I don't see the Innovis V3 on our compatibility chart from DIME. Which usually means there isn't a hoop that is compatible. I would recommend that you contact DIME directly to see if they are planning to make a compatible hoop. They can be reached at 888-739-0555 or [email protected] Have a great day!

Hi Rita,

Thanks for the question! There are a couple of Snap Hoops which are compatible to the Baby Lock Journey. The largest is the LM5 7" x 12", which you can find at this link. https://www.embroidery.com/product?productID=26727... Have a great day!

Hi Jennifer,

The Husqvarna Rose isn't on our compatibility chart from DIME. I'd recommend contacting DIME to see if they have a compatible hoop or are making a compatible hoop soon. You can contact them at 888-739-0555 or [email protected] Best of luck, and have a good day!

Hi Jody,

Yes, the Dream Maker Innovis VE2200 is compatible to some of the Snap Hoops. The hoops it is compatible with are these listed with the links to them.

LM3 4" x 4": https://embroidery.com/product?productID=267275&ef...

LM1 5" x 7" : https://embroidery.com/product?productID=267276&ef...

LM8 6" x 10": https://embroidery.com/product.ec?productID=275724

LM5 7" x 12": https://embroidery.com/product?productID=267279&ef...

Please let us know if you have any other questions. Have a good day!

Thank you very much!

You're welcome!

Hi Terry,

I looked into it and remembered why the Icon 2 isn't on the list of compatible machines for the HM5 200 x 360. We still haven't gotten any information on the machine from Pfaff. So we haven't been able to put the machine information onto our website yet. Once we get some more information we'll do that, and then add it to the list of compatible machines. But the DIME compatibility chart does say that the Icon 2 is compatible with the HM5 200 x 360. So you are fine to use your Icon 2 with that hoop. Have a great day!

Hi Terry,

Yes, the Icon 2 is compatible with the HM5 200 x 360. It looks like the list hasn't been updated. We'll update that as soon as we can. Have a great day!

Hi Nola,

Thanks for checking! The sewing area is the 150 mm x 400 mm or in inches 5.91" x 15.75". We call the Snap Hoops by the size of their sewing area. Please let us know if you have any other questions. Have a great day!

Hi Lucille,

The Husqvarna Epic 2 is compatible with the HM1 120 x 120 mm, HM4 200 x 200 mm, HM2 200 x 260 mm and the HM5 200 x 360 mm. Please let us know if you have any other questions. Have a great day!

Hi Anita,

Yes, there are 4 hoops that are compatible to the Brother Innovis VE2300. The largest hoop that will work for that machine is the LM5 7" x 12". Please let us know if you have any other questions. Have a good day!

Hi Rita,

Thanks for the question. Our compatibility chart from DIME does not list any of the Bernette's as being compatible with the Snap Hoops. Which means they haven't made a compatible hoop yet. I'd recommend contacting DIME directly to see if they have plans to make a Snap Hoop for your machine. Their phone number is 888-739-0555. Have a great day!