1:

You will need the following supplies for the tissue cover: Embroidery machine with 4 x 4 inch (100 x 100mm) embroidery field minimum, 1 piece stabilizer to fit hoop, 2 pieces decor fabric 5 x 6 folded in half to form 2 1/2 x 6, 2 pieces stabilizer 2 1/2 x6 (optional), 1 piece decor fabric 10 x 6 folded in half to form 5 x 6, 1 piece batting 5 x 6 (optional), Embroidery thread.

 2:

You will need the following supplies for the wet wipes cover: Embroidery machine with 5 x 7 inch (130 x 180mm) embroidery field minimum, 1 piece stabilizer to fit hoop, 2 pieces decor fabric 5 x 8 folded in half to form 2 1/2 x 8, 2 pieces stabilizer 2 1/2 x 8, 1 piece decor fabric 8 x 10 folded to form 5 x 8, 1 piece batting 5 x 8 (optional), Embroidery thread.

 3:

Load designs onto your machine. If your own monogram or design is desired, you can substitute them at the same point that this design sews the words "tissues" or "wipes". Use the merge key on your machine or in your software.

 4:

Hoop stabilizer. Sew placement stitch.

 5:

Place folded 2 1/2 x 6 pieces over placement lines, folded edge to center. Sew tack down stitch.

 6:

Sew embroidery design/monogram if desired.

 7:

Place folded 5 x 6 fabric over front flaps. Sew tack down stitch. Sew final zigzag stitch.

 8:

Remove from hoop. Trim to zigzag stitch. Trim away stabilizer from front flaps close to seam line. (Using a seam ripper, slide along seam line careful not to cut into it.)

 9:

Boxing corners (optional): To add dimension to cover, pinch corners into a triangle, matching side seams. Sew with a straight stitch 1/2" from point on all 4 corners. Turn right side out.

 11:

Enjoy.