Specifications | |
---|---|
Sewing Area: | 200mm (7.87") x 360mm (14.17") |
Largest Hoop Size: | 200mm (7.87") x 360mm (14.17") |
Needle Type: | Flat Shank Domestic |
Bobbin Type: | Style 15J |
Introduced: | 2022 |
Read Formats: | JEF, JEF, JEF+, JEF+, JPX, JPX, DST, DST |
Please message us if you have additional info on this machine. |
https://www.elna.com/en-gw/model_embroidery_ex830l...
Online manual: https://cdn.poconosewandvac.com/web/products/instr...
Recommended to use the included bobbins "Using other bobbins, such as pre-wound
paper bobbins, may cause stitching problems and/or damage to the bobbin holder"
There are 5 file attributes as follows:
: *.JEF (JEF embroidery format)
: *.JEF+ (editable JEF embroidery format)
: *.JPX (*.JEF+ with a background bitmap image)
: *.JPX (Acufil embroidery format)
:*.DST (Tajima embroidery format - no color information)
Direct PC-Link
You can connect the machine to a PC with the USB cable
included in the standard accessories.
You need to install Embroidery Editor and the USB driver
for the machine on your computer.
Embroidery Editor and the USB driver are available in
the Embroidery Editor CD-ROM included in the standard
accessories.
Start up the machine and PC, and insert the type “A”
USB connector into the PC.
Insert the type “B” connector into the machine.
You can send original embroidery design data from a PC
to the machine.
Refer to on-screen help of Embroidery Editor for more
details.
You can open embroidery designs saved in the machine’s
internal memory or on a USB flash driv